Best Ice Auger Reviews
What is the single most difficult part of ice fishing? If you hate cold weather, it may be sitting out in the cold all day. But, for most people the answer is drilling holes in the ice. On an average day, you may drill 20 or more holes, so you need to take the best ice auger out with you to make sure the task doesn’t get any harder than it has to be.
How can you pick a good ice auger? I want to help you learn what makes the difference between each different model of ice auger, so you can make the best choice for your own habits and needs.
Types of Ice Augers
Before I talk about any specific features, you need to know the different types of augers available and what makes each one different from the next.
These are the oldest and most common types of ice augers offered. A manual auger drills a hole using only your strength. They come in a variety of hole sizes, usually from 4 inches to 10 inches. This type is the easier to carry around, because it is much lighter, but it is the most difficult to use when the ice gets very thick near the end of the season.
Since there are not outlets on the ice, electric ice augers are exclusively powered by rechargeable battery packs. These are lighter weight than a full fuel tank, but do add some significant weight to the device. However, electric do a good job of cutting a consistent, deep hole in the ice without much manpower needed. They are easy to turn on, although they can bring trouble if the engine gets too cold.
There are three types of gas that can be used in a gas-powered ice auger: Gasoline alone, gas + oil mixture, or propane. Different ice augers accept different fuel depending on the type of engine you get. 2-stroke engines need a mixture of gas and oil, while 4-stroke engines can take fuel alone with a separate oil tank. Propane ice augers are a newer type of fuel source that reduces weight while maintaining excellent power.
Most gas-powered ice augers are very powerful, and they are the fastest at cutting holes. Plus, while they may be more difficult to start in the cold, they are likely not to falter in the same way that an electrical ice auger might in the coldest temperatures. However, gas ice augers are by far the heaviest types.
How to Choose the Best Ice Auger
Now that you’re familiar with the types of ice augers offered, take a look at some of the things to consider when you’re looking at ice auger reviews before you buy:
Gas-powered ice augers make the most noise and vibrations, with electric coming in second place and hand augers being the quietest. If this is a concern for you, because of potentially scaring away fish or just being disturbed by the noise, then you should go for a hand auger or a softer electric auger.
Hand augers are also the lightest weight of all the different types of augers. They are much easier to carry around with you and will not add unnecessary weight to your trek. Gas-powered augers are the heaviest, while electric augers are heavy, but not as heavy as gas. Keep in mind that you may have to carry an extra battery with an electric ice auger, adding to the weight.
The number of blades on your auger may affect how stable it is and how quickly it works. They come with between 1 and 4 blades normally.
If the ice is at its thickest, you will have a difficult time using a hand ice auger to drill your holes. The strength needed to drill through 3 feet of ice manually may be more than you are willing to exert. Gas ice augers make any thickness seem easy to drill, because they are the most powerful. Electric ice augers do a decent job, but may be a bit strained with 3 foot or thicker ice.
A majority of ice augers come with the drill diameter between 4 and 10 inches. 6 or 8 inches is the standard for most fishermen, and the experts believe you won’t ever really need anything larger. The larger the hole size, the bigger and heavier the ice auger needs to be.
Unfortunately, because of their superior power and effectiveness, gas-powered ice augers are much higher in price. Electric ice augers can be a bit pricy, but usually are cheaper or similarly priced to gas-powered. Hand augers and by far the lowest in cost at just a fraction of the gas-powered cost.
Type of Ice Auger
Ideal Ice Thickness
Max 2 Ft.
6, 7, or 8 In.
Max 3+ Ft.
Max 2 Ft.
4, 5, 6, 7, or 8 In.
Max 3+ Ft.
8 or 10 In.
Max 3+ Ft.
Designed for ease of use and convenient transportation, this hand ice auger has straight steel blades, a simple system for assembly and disassembly, and a comfortable gripping handle. All of these features work together to make it effective for carrying around with you and using even in thick ice conditions.
This ice auger is available in 6, 7, and 8 inch diameters with an adjustable length of 49-58 inches. It only weighs 6 pounds, so you can heave it around without any trouble. Blades are replaceable, so you can swap them out if you want a different type.
- Included blade guard helps to keep your safe while using or carrying the ice auger
- - Works well on 1 or 2 foot thick ice
- - Blades are easy to remove for sharpening
- - Depending on you, it can drill most holes in under 2 minutes
- - Good for shorter people, because it can adjust even lower than other hand ice augers
- - Handle is made from plastic, instead of sturdier rubber or foam
Designed to be easy to carry and comfortable for use, this wide-handle electric auger hits the marks on both of those fairly well. It’s a hefty 21 pounds, which is a good weight for electric augers although a bit heavy still. You will probably want to look into a carrying case to make it easier to transport.
This ice auger is made of strong steel that isn’t likely to break from a bit of use. It has a wide handle design that’s easy to keep hold of while working, plus a large trigger that’s convenient to push even with gloves on. The drill bit can extend an extra 12 inches for deeper holes.
- Battery is very long-lasting and can drill more that 40+ holes without losing charge
- Reverse feature makes it easy to clear your hole without your hands
- Quiet compared to other electric or gas-powered ice augers
- Cuts through very thick ice without strain
- Battery will not turn on properly if it gets too cold, you must keep it warm even on the ice
- Must be dried thoroughly after use or rust can occur in unpainted areas
You can take a look here:
As one of the well-recommended hand ice augers, the Strike Master Lazer has a few features that make it stand out. First, the blades are made from chrome-alloy stainless steel for rust protection and durability. Secondly, the ergonomic handle is comfortable and very intuitive to use. Lastly, powder-coated paint is used on the body of the device to keep away rust and to prevent ice from building up on the blade area.
Rubber hand grips are another added comfort feature that makes people enjoy using this ice auger to drill. It can adjust from between 48 and 57 inches, and is sold with blade sizes from 4 to 8 inches. At 7 pounds, it’s easy enough to carry around with you.
- Smaller sizes can cut deep holes in under a minute with absolute minimal effort
- All sizes are easy to cut with compared to other hand ice augers
- Fast drilling in almost all ice conditions
- Can be hooked up to a drill
- Blades are made in China and may not be as high quality as some others – although they are replaceable
- Drill can hang up a bit cutting the last inch of ice in a hole
This 2-stroke gas-powered ice auger is a good choice if you’re looking for something to cut through thick ice quickly, without the added weight of a larger unit. Starting it up is easy enough, with a bubble primer and a pull tab to get it going.
An 8000 RPM engine spins the blades, making this a high-performance machine that’s very capable of cutting through 3+ feet of ice without stalling. It is available in 8 or 10 inch sizes and is 42 inches long without a built-in extender.
- Blade guard comes standard with the tool
- Machines stays upright easily, which means no fighting to keep it straight
- Assembly is very easy
- After a little bit of use, the engine easily starts with 1 pull
- No built-in extender, so you are limited to a certain ice thickness only
- Heavy weight at 31 pounds
Of all the ice augers on this list, this is the most powerful with a 2-stroke 55cc engine that rips through the ice easily. This tool can dig through even the thickest ice, with the only restriction being its own height of 86cm (about 3 feet).
You can get this auger with a 10 inch blade size for large holes in the ice. It’s a bit heavy, so you may need to consider buying a carrying case if you plan to walk around to the lake or the pond with it.
- - Can be used to dig in soft dirt as well as ice
- - Cuts through ice very quickly for easy hole digging
- - Starts easily even in cold weather
- - Usually starts on first or second pull
- - Heavy eight of 34 pounds is hard to carry around
- - No extension for the bit, so you cannot exceed the standard bit length
From all of these great ice auger reviews, my opinion is that the best ice auger is the Strike Master Lazer. While it is a hand ice auger that will take a bit more strength to get through some of the thicker ice, it works very well in most ice conditions with fairly minimal effort. It is well priced to be affordable for everyone, has a comfortable design that’s easy to use, makes almost no noise, and weighs so little you can easily carry it anywhere.
Hopefully you now understand enough about ice augers to go and get yourself the best ice auger available to fit your requirements!